Flush Solution for Heating Systems:

Modern heating systems are now very energy efficient. The fact is, however, that up to 20% of the energy can be lost again due to muddy heating pipes and damage to pumps and control valves. If there is a risk that the heating pipes could be silted up, it is absolutely recommended to clean the heating system properly with a professional cleaner.

Concept of Demineralisation

Optimizes heat transfer, protects against damage.

  • Heat energy is lost when transporting the heat into the living space and damage to pumps and valves occurs if system is not properly cleaned and maintained.
  • Only when the pipes are clear does the optimal heat transfer occur.
  • As a rule, the heating can be operated at a lower temperature after cleaning

Reliable cleaning without CHEMICALS:

The magnetic cleaner for heating systems is ideal for gentle and safe cleaning of closed heating and cooling circuits. Due to its excellent performance, deposits such as magnetite and rust sludge, building dirt and residues of conditioning chemicals, are safely removed. The cleaner has an alkaline effect and may be added to the system water undiluted. It can be used for any system water quality, and for all components of a heating system can beused during heating operation (15 – 90 ° C), when cleaner is present in system. The cleaner should be kept in system for a minimum of 7 days, longer is an advantage, before flushing.

Flush Solution used to clean heating systems of accumulated deposits

General features:

  • Not acidic- pH 9.5
  • Works regardless of the heating water temperature (15 ° -90 ° C)
  • Sufficient for up to 1000 litres of system water
  • Can be drained into the sewage system with rinsing water
  • Poison class free
  • Can reduce heating costs

Subsequent filling with demineralized water ensures that the renewed risk of corrosion and thus sludge formation are minimized. For long-term regulation of the heating water and the reliable prevention of new deposits, the installation of a magnetic heating water regulator is recommended. This not only saves energy, but also reduces the risk of damage caused by corrosion products in control valves and pumps