Refill/TOP-UP Stations:

Magnetic refill stations for fixed installation in different sizes:

Magnetic GmbH provides a range of Refill Stations to enable Heating systems to be Topped Up/Refilled with demineralised water, appropriate to system capacity. This ensures a Heating system which is already demineralised is topped up with similarly demineralised and thus not contaminated.
These units are installed on the water feed pipe to heating system, thus ensuring all Top Up water is safely demineralised before being added to system water.

Components of NF2 Fill up station which describes how it works

Refill station for the replenishment of heating systems Filters lime and aggressive salts from the water.

  • Extremely low follow up costs ensuring system integrity
  • Refilling unit with Resin is easy with practical bags
  • 100% control by measuring computer with precise conductivity measurement and resettable water meter, alerting when resin needs to be replaced.
  • Very flexible to use
  • Optional with System separator.

Different sizes for every need: Capacities range from 225 litres to 2,400 litres of fully demineralized water at 350 ppm Hardness

With the stationary refill stations from magnetic you can produce demineralized fill water for your heating. They are suitable for refilling closed heating and cooling circuits, using quality mixed-bed resin, in accordance with the guidelines of VDI 2035. Thanks to the measuring and monitoring unit that all magnetic refill stations have all water values can be seen at a glance and immediately see when the resin is used up. If the resin is exhausted, a simple resin exchange on site is possible. Only the resin in the container is changed. This can be disposed of with the household waste. The fresh resin is simply emptied into the container. It is best to add more water to displace as much air as possible.

Different sized filling stations for resin

Modern heating systems are highly effective. That is why they
also need high-quality fill water.

blank

System Separator:

System separator BA DN 20 For permanent installation of the magnetic demineralization refill station according to DIN EN 1717 System separator with controllable differential pressure type BA. Chromed brass case. Nominal pressure: PN 10, max. Temperature: 65 ° C.

Refill Combination:

Refill combination for filling and refilling heating systems.

The integrated filling group is used to automate the filling process in heating systems. A backflow preventer and a pressure reducer are integrated in the filling group; this ensures the correct filling pressure in the system. Thanks to the BA system separator, which works on the three-chamber principle, this compact fitting prevents non-drinking water from being sucked back, flowing back or pressed back into the drinking water pipe from the heating system.

blank