eNode24 DO Remote
controller for 24V actuators (Digital)

The eNode24DO is a remote relay that can be controlled remotely integrated with Enerbrain Energy Cloud platform. The device is connected via an integrated 3G modem and can be installed to intercept any load up to 24A-440V. For example can be used to interrupt the signal to turn on a heater, or to stop the power supply of a light circuit, etc.

Once connected online to the algorithms of Enerbrain, it allows to control better air quality and save over 30% of energy.

eNode24 Remote controller for 24V actuators (Analog)

The eNode24 allows to control any 24 volts actuators with the algorithms and backend services of the Enerbrain service. The device is connected via an integrated 3G/4G modem and can read and write 0-10V signals from and to the existing actuators such as valves, dampers, inverters, pumps. Once connected online to the algorithms of Enerbrain, it allows control of air quality and savings over 30% of energy

eSensePRO WirelessTemp., RH and VOC

The room sensor eSensePRO is studied to be always connected online thanks to Sigfox Network. Thanks to a rechargeable battery that last for over 4 years, installation does not require any wiring or configurations as it comes pre-configured out of the box. eSense can be used alone (can be used by a programmable controller i.e. Multinet) or can be part of Energy Cloud, the energy efficiency solution. The sensor uses Sigfox Network. eSensePRO measures temperature, relative humidity and Air Quality (VOC).

eSensePRO Wireless Temp., RH., Air Quality, CO2

The room sensor eSensePRO CO2 is studied to be always connected online thanks to Sigfox Network. Thanks to a rechargeable battery that last for over 4 years, installation does not require any wiring or configurations as it comes pre-configured out of the box. eSense can be used in combination with a programmable controller Multinet (eGateway is needed) or can be part of Energy Cloud, the energy efficiency solution by Enerbrain. The sensor uses Sigfox Network

eSense PTC – 30..450 °C PTC

Wireless sensor to measure temperature, relative humidity and PTC external probe.
The sensor is always online thanks to Sigfox and LoRa connectivity, recording and transmitting environmental data such as relative humidity and temperature detected by the PTC probe.

Thanks to the rechargeable battery that lasts over 4 years, the installation requires no wiring: the sensor is supplied already configured and ready to transmit data.

The eSense can be used alone (with APIs) or as part of Enerbrain’s energy efficiency system. Manufactured in Italy with the best components on the market, it has the highest precision and does not require calibration. The PTC probe allows temperature measurement on pipes or other surfaces.

eNode220 remote controller for 220V actuators

The eNode220 allows to control any 220V actuator with the algorithms and webapp of the Enerbrain system. The device is connected online with a 3G modem with integrated VPN and is able to control any 220V actuator with a left-right 3-points control. Once connected online, together with the algorithms of the service Energy Cloud, it allows to control air quality and save over 30% of energy

ePLC: PLC control electrical panel

The ePLC is a full electrical panel that can be installed to improve the energy performances of existing PLCs in the field.

The concept is that thanks to advanced algorithms, this additional controller can provide a better usage of the HVAC systems.

When additional performances are not needed or when desired by the client, they ePLC can stay in bypass mode, and only listen to the existing system.