ASPIRCOMFORT PRO X 460H

Single room heat recovery unit with heat pump and thermo-dynamic recovery, horizontal application

ASPIRCOMFORT PRO X 460H

FOR MORE INFO

Description

Single room heat recovery unit with heat pump and thermo-dynamic recovery, horizontal application.

Complete unit capable of independently integrating the ventilation requirements and integrating the cooling thermal requirements of the served rooms. The unit is complete with all components for its operation and ready to use.
ASPIRCOMFORT PRO X is a unit designed for room air renewal. The ease of installation through two 160 mm diameter holes and the high fresh air flow rate allows the application in situations such as residential buildings, schools, surgeries, offices and all contexts where air exchange is required.
Thermodynamic recovery allows integration with respect to environmental climatic conditions, helping the air conditioning system to meet indoor comfort. In addition, the injected air is always at a temperature close to or better than the room temperature, thus ensuring a higher perceived comfort.
The unit consists of a monoblock including every component for correct operation: fans, cooling circuit with high efficiency compressors, air filtration sections and high efficiency counterflow heat recovery unit.

General features

  • Constant flow centrifugal fans with directly coupled brushless electronic motor and modulating control; the fans operate in various modes controlled mainly by the air quality sensor located inside the unit.
  • The inverter refrigeration unit allows active recovery of energy from the exhaust air. The thermodynamic recovery allows, thanks to its cooling circuit, to supply energy to the environment in a higher quantity than that taken away by the ventilation for 90% of the unit’s operation.
  • ePM1 filter located after the coil to completely filter out any impurities in the intake air, On the outside air there is a Coarse pre-filter that protects the cleanliness of the unit.
  • Self-supporting sheet metal frame. Self-supporting sheet metal structure, externally painted (in the visible versions), with polyethylene and EPDM thermal and acoustic insulation in between.
  • Cooling circuit made of brazed copper complete with high-efficiency BLDC compressor, filter dryer, finned coils, electronic expansion valve, reversing valve and safety devices.
  • Electric panel on-board the unit with microprocessor and dedicated regulation. Fan management with air quality probe, display and temperature setpoint, timed dirty filter management, panel with graphic interface and WIFI on board the machine and remote control included.
  • The unit is equipped with a UV lamp (accessory), which enables a germicidal action to be carried out on the air introduced from outside through the effect of UVC; the lamp is activated automatically according to the quality of the room air

Applications

With Aspircomfort high airflow and easy instalation, this solution is applicable to many diverse locations:

  • Commerical buildings
  • Schools
  • Offices
  • Restaurants

SPECIFICATIONS

  • Constant flow centrifugal fans with directly coupled
    brushless electronic motor and modulating control; the
    fans operate in various modes controlled mainly by the air
    quality sensor located inside the unit.
  • The inverter refrigeration unit allows active recovery of energy from the exhaust air. The thermodynamic recovery allows, thanks to its cooling circuit, to supply energy to the environment in a higher quantity than that taken away by the ventilation for 90% of the unit’s operation.
  • ePM1 filter located after the coil to completely filter out any impurities in the intake air, On the outside air there is a Coarse pre-filter that protects the cleanliness of the unit
  • Self-supporting sheet metal frame. Self-supporting sheet metal structure, externally painted (in the visible versions), with polyethylene and EPDM thermal and acoustic insulation in between.
  • Cooling circuit made of brazed copper complete with high-efficiency BLDC compressor, filter dryer, finned coils, electronic expansion valve, reversing valve and safety devices.
  • Electric panel on-board the unit with microprocessor and dedicated regulation. Fan management with air quality probe, display and temperature setpoint, timed dirty filter management, panel with graphic interface and WIFI on board the machine and remote control included.
  • The unit is equipped with a UV lamp (accessory), which enables a germicidal action to be carried out on the air introduced from outside through the effect of UVC; the lamp is activated automatically according to the quality of the room air

Technical Features

Technical Specification

Type of Fans Forward-bladed centrifuges with Brushless motor with constant flow function
Number of fans No. 2
Air Flow BO / V3 / V2 / V1 m3/h 460 / 400 / 240 / 140
Useful Pressure Pa –
Compressor Type Rotary BLDC
Refrigerant Gas R410A
Filters 2x ePM1 80% + Coarse PREfilter
Max. fan input power kW 0.12
Max Compressor power input kW 1.15
Power Supply Voltage V/ph/Hz 220/1/50
Max Total input power kW 1.27
Max Total Absorbed Current A 5.8
Sound Pressue dB[A] 43

Technical data Winter Operation

Thermal Capacity kW 3.62
Absoberd Power kW 0.84
Total COP 4.3

Technical data Summer Operation

Thermal Capacity kW 2.77
Absoberd Power kW 0.91
Total COP 3.0

Certifications

The CE marking (applied on each machine) certifies compliance with the following Community standards:

  • Low Voltage Directive 2014/35/EC.
  • Electromagnetic Compatibility Directive 2014/30/EC.